Product Description
The RefPICC compatible card is used to verify whether the PCD meets the energy operating field strength requirements as stated by ISO/IEC 14443-2 [2] and ISO/IEC 10373-6 [8], the minimum and maximum field strength. It’s ideal for verifying your own setup or calibrating the RFIDisplay.
This card can run in two modes:
• the automated run mode provides constant fixed voltage output independent of the distance of the Auto RefPICC Card vs your reader (a minimum RFID field is required to output your desired voltage). This output will be fixed to either 6V or 3V
• the fixed run mode provides voltage output that is dependent on the distance of the Auto RefPICC Card from your reader.
Specifications:
- 6V or 3V output, depending on requirement (possible to program other voltages)
- ISO10373:6 compatible
- Easy tunable between 19MHz and 13.56MHz, factory tuned either to 19MHz or 13.56MHz
- Pre-calibrated (you can calibrate it yourself in steps of 0.01 V)
- Usage range: 0 – 10 A/m.
- Accuracy: +/- 0.02 V
Shipment will follow within 48 hours of order and will be delivered to you according to standard DHL time lines.
